複合式材質桿頭 vs 純金屬材質/Composite wood vs metal wood！~上集

現在球桿桿頭的兩個陣營就是複合式材質和純金屬兩個。其支持的廠商有Taylormade + Callaway 為複合式材質，對上金屬材質的Ping + Titleist。這幾個品牌就佔據市場超過7成的份額，所以這都是影響你我在購買的決定，而你必須要瞭解材質是的優缺點，才能選擇一款適合你個人使用的桿頭。沒有絕對的答案，看客人需求。

再說一點，就是日系的桿頭多數都是純金屬材質。原因很簡單，就是成本！要知道品牌商，生產球桿和它訂購的數量有絕對的關係。如果你的數量不多，你的單位成本就高。加上複合式材質的生產成本比純金屬的鑄造桿頭要貴上不少。主要需要把碳纖維材質黏到金屬材質桿頭上，工序和複雜度也比較高。

這些行為都是增加成本的因素。當然純金屬桿頭的好處就是擊球回饋上更為紮實、明顯。對球的擠壓感會更為顯著。尤其是桿面為鍛造的合金，擊球手感會提升不少。當然，桿面基本對於複合式或純金屬桿頭都是可以焊接上。所以就算是複合式桿頭，桿頭也是鍛造合金，你的擊球手感也可以很綿密和紮實。

如果以單純生產工序和成本來說，複合式的桿頭需要的做工和複雜度要比純金屬桿頭要更高。會需要更多的人力成本去進行結合、黏結、組裝。純金屬桿頭基本就對桿面進行結合、焊接就好。相對簡單、容易。上漆也方便和容易多了。也·就是說，複合式桿頭都是零件拼裝而成。不是一體成形。

而為什麼要使用複合式材質桿頭。目前的複合式材質就是以碳纖維在桿頭不同部位。把桿頭的重量有效的集中在特定部位，比如桿頭底部。桿頭重量為更加集中，可以控制桿面重心。桿面重心就和你的擊球起發角有關。當然還不只有這樣。桿頭重量集中，可以讓擊球的副作用力更為集中和強大。

本文未完，下集請點下方。

複合式材質桿頭 vs 純金屬材質/Composite wood vs metal wood！~下集
http://www.peargolf.com/article/fuheshicaizhigantou-vs-chunjinshucaizhic...

Nowadays there are two types of woods heads, one is composit,e the other is Titanium or stainless which is pure metal. There are two major brands using composite, it's Taylormade and Callaway, the pure metal wood is Ping and Titleist. These brands are occupied over 70% of golf wood sales and you need to know about the head materials in order to select the right head for your usage.

How about Japanese brands' woods? There is metal wood mainly since the composite head is more expensive in manufacturing and requires more quantity to start the order. The cost is always related with the materials you are using on the golf club head, the metal head are used for cast most of the cases with forged face.

It's simple production for metal head as the main body is cast with forged face head. Comparing the composite wood, it's like puzzle that build the pieces by pieces. The face, sole, crown are three parts to build and some other models have more than 3 pieces to assemble. That's why it takes more time and manpower to compete the work with high cost.

However, the advantage of the composite wood is able to make the head weight more centralized and located on the certain spot of the head. This way we are able to locate the center of gravity of the head on the certain spot such as low and back or low and front. The CG of wood head is able to make your launch angle for certain trajectory, that's why it's so important.

The another thing is the control of CG location is able to make the impact power and energy more efficient and productive. That's why your ball speed can be fast or be different initial speed. It's all related regarding the head material and design. That's why you need to know it before you make the purchase.

Composite wood vs metal wood！~Part II
http://www.peargolf.com/article/fuheshicaizhigantou-vs-chunjinshucaizhic...