倒旋和彈道高度決定你這桿子的特性/It's all about the spin rate on the distance！~下集

倒旋和彈道高度決定你這桿子的特性/It's all about the spin rate on the distance！~上集
http://www.peargolf.com/article/daoxuanhedandaogaodujuedingnizheganzidet...

下集開始。

再說到桿身部分。桿身在大量運用高噸位碳布材質後，桿身強度提升，也讓擊球倒旋大量減低。因為碳纖維桿身會得到比較彈的反饋，現在在高噸位碳布材質桿身的運用下，桿身的反饋就沒有太大的折點和彈力作用。但不是說桿身沒有彈的效果，而是彈的幅度非常小，但桿身的效能比沒有高噸位碳布的要好。

就比如，你要跳遠，需要助跑才能跳的最好的距離。但當你鍛鍊你的身體和強化下半身，你不需要助跑，定點跳就可以比以前助跑跳的距離遠。同樣道理，因為材質的提升和強化優勢下，高噸位碳布就是可以讓你威而鋼！當然副作用就是你不會像以前桿身那樣有很多反饋和變化。

擊球的桿身反饋就變得比較簡單。這不是不好，但對於很多senior球友，揮桿速度沒有很快，比較利用手在操控球桿和享受桿身變化的打法，就會變得無法去掌握桿身的變化。當然還是有一些日系桿身也會把桿身的彈性或折點做的比較明顯，維持一些桿身特有的回饋。但這類的桿身其實裡頭的高噸位碳布材質比例是相對低很多。

因為材質特性就是強度高，如果要特別去有彈性感覺出來，勢必要利用更多碳布強度低的材質去產生彈力效果。所以我對這類桿身都不會去考量。因為這類桿身首先，不耐打。很容易打軟，同時倒旋也會比較高，球容易打高。穩定性會不好。所以我都會選桿身以高噸位碳布材質為主的產品。

所以桿身材質決定了擊球倒旋量和它的彈道高度。當你在看一支桿子，在近5年的產品時，從這幾個方面下手，就可以瞭解這個桿子的效果和表現。而這年頭已經走低倒旋、快球速和彈道像飛彈型的飛行軌跡。這才是科技和材質的產物。就算你揮桿速度不快，一樣可以得到這樣的結果！

The recent shaft development and design, it's using high module carbon fiber sheet on the graphite shaft that increase the shaft strongness and less deformation with low back spin and low side spin features. In other word, the shaft feedbacks less without too much bouncing feel. If you like to have more shaft feedback during the swing, it's not what you can gain from.

That doesn't mean the shaft is not good without more feedback. Since the shaft material increases the bouncing power and with the same swing speed but you can get more power and energy from the shaft. It's efficient and productive compared 10 years ago shafts. That's the advantages from the technology and materials.

Of course, there are some Japan brand shafts, they still have more fun on shaft feedback but such shafts are not using too many high module carbon fiber sheet in the shaft construction. They use regular carbon sheet to increase the shaft feedback then you will feel more feedback from the bending point of the shaft. It tells you the good and expensive materials are less and regular material is the majority.

However, you still pay high price for such shaft with less high module carbon sheet inside. That's the key for selection the graphite shaft. If you would like to get low back spin and low side spin for your performance, it's better to select the shaft with carbon sheet at least 40t strongness. Any shaft material lower than 30 ton carbon sheet is regular strongness.

Therefore, selecting the shaft is key for gaining the performance. You need to know what shaft and what wood head are good for you to get the low spin advantage. If you do not know to leverage the new technology and new materials on golf, you won't be able to have good result. Even though you do not have good swing speed, but you still can get the ball flight and ball speed like bullet!

請尊重本站內容智慧財產權.勿未經洋梨高爾夫同意下進行非法轉載文章!如想進行文章轉載需求,請與下面電郵聯系!

本站新設新浪微博网?版：http://weibo.com/peargolf

手机版：http://weibo.cn/peargolf

大家可加入我的粉絲團,我會不定時將新的信息與活動發怖在微博與臉書，推特內.

Facebook/臉書上搜尋@peargolfcom就有洋梨高爾夫的粉絲頁。twitter/推特搜尋“@GolfPear”